Volume 37 Issue 4
Aug.  2023
Turn off MathJax
Article Contents
Xiong Bo, Tong Yanguang, He Jianghui. Direct Shear Behavior of Three-dimensional Geogrids-soil Interface with Different Square Apertures under Various Shear Rates[J]. GEOTECHNICAL ENGINEERING TECHNIQUE, 2023, 37(4): 470-474. doi: 10.3969/j.issn.1007-2993.2023.04.017
Citation: Xiong Bo, Tong Yanguang, He Jianghui. Direct Shear Behavior of Three-dimensional Geogrids-soil Interface with Different Square Apertures under Various Shear Rates[J]. GEOTECHNICAL ENGINEERING TECHNIQUE, 2023, 37(4): 470-474. doi: 10.3969/j.issn.1007-2993.2023.04.017

Direct Shear Behavior of Three-dimensional Geogrids-soil Interface with Different Square Apertures under Various Shear Rates

doi: 10.3969/j.issn.1007-2993.2023.04.017
  • Received Date: 2022-06-21
  • Accepted Date: 2023-03-02
  • Rev Recd Date: 2023-02-11
  • Publish Date: 2023-08-08
  • For reaching the influence of the aperture of the three-dimensional geogrids with enhanced transverse ribs on the interface behavior, three geogrids with different square apertures were made by 3D printing technology. Effect of the square apertures (25 mm×25 mm, 35 mm×35 mm, 45 mm×45 mm), vertical stresses (20, 40, 60 kPa), shear rates (0.5, 1, 2 mm/min) were investigated by large scale direct shear test. The results show that the peak shear stress and friction angle of the interface between the geogrid with aperture of size 35 mm×35 mm and soil are greater than others; as the shear rate increases doubly, the peak shear stress changes less, and the rate of peak shear stress change at different shear rates is between −4% and 11%; the greater the vertical stress, the greater the peak shear stress, and the rate of peak shear stress change is greater than 20%, indicating that the vertical stress has obvious effect on the shear character of the interface of reinforced soil.

     

  • loading
  • [1]
    李晓俊,黄仙枝,白晓红. 加筋土技术的理论研究与工程应用[J]. 科技情报开发与经济,2004,14(6):145-147.
    [2]
    王正宏. 一种有发展前途的防汛抢险新材料——土工合成材料[C]// 第一届全国城市防洪学术会议论文集, 1992.
    [3]
    包承纲. 土工合成材料界面特性的研究和试验验证[J]. 岩石力学与工程学报,2006,25(9):1735-1744. doi: 10.3321/j.issn:1000-6915.2006.09.002
    [4]
    任非凡,刘 铨. 加筋土结构筋–土界面特性研究进展[J]. 西部交通科技,2020,(4):5-10,28.
    [5]
    王家全,陆梦梁,周岳富,等. 土工格栅纵横肋的筋土承载特性分析[J]. 岩土工程学报,2018,40(1):186-193. doi: 10.11779/CJGE201801020
    [6]
    王家全,康博文,周圆兀,等. 填料粗粒含量对筋土界面拉拔性状的影响[J]. 岩土力学,2022,43(5):1249-1260.
    [7]
    WANG J,YING M J,LIU F Y,et al. Experimental investigation on the stress-dilatancy response of aggregate-geogrid interface using parameterized shapes[J]. Construction and Building Materials,2021,289:123170. doi: 10.1016/j.conbuildmat.2021.123170
    [8]
    王家全,祁航翔,黄世斌,等. 土工格栅与碎石土混合料界面作用的大型直剪试验研究[J]. 水文地质工程地质,2022,49(4):81-90.
    [9]
    吴景海,陈 环,王玲娟,等. 土工合成材料与土界面作用特性的研究[J]. 岩土工程学报,2001,23(1):89-93. doi: 10.3321/j.issn:1000-4548.2001.01.021
    [10]
    李丽华,高 萌,罗诗哲,等. 不同筋材界面剪切试验研究[J]. 施工技术,2017,46(1):54-57.
    [11]
    HAN B,LING J,SHU X,et al. Laboratory investigation of particle size effects on the shear behavior of aggregate-geogrid interface[J]. Construction and Building Materials,2018,158:1015-1025. doi: 10.1016/j.conbuildmat.2017.10.045
    [12]
    刘飞禹,江 淮,王 军. 砾石–格栅界面循环剪切软化特性试验研究[J]. 岩土力学,2021,42(6):1485-1492.
    [13]
    刘飞禹,朱 晨,王 军. 剪切速率和法向加载频率对筋土界面剪切特性的影响[J]. 岩土工程学报,2021,43(5):832-840. doi: 10.11779/CJGE202105006
    [14]
    CHENARI R J,KHONACHAH R E,HOSSEINPOUR I,et al. An experimental study for the cyclic interface properties of the EPS–sand mixtures reinforced with geogrid[J]. International Journal of Civil Engineering,2020,18(2):151-159. doi: 10.1007/s40999-019-00424-3
    [15]
    刘开富,许家培,周青松,等. 土工格栅–土体界面特性大型直剪试验研究[J]. 岩土工程学报,2019,41(S1):185-188.
    [16]
    MAKKAR F M,CHANDRAKARAN S,SANKAR N. Experimental investigation of response of different granular soil-3D geogrid interfaces using large-scale direct shear tests[J]. Journal of Materials in Civil Engineering,2019,31(4):4019012. doi: 10.1061/(ASCE)MT.1943-5533.0002645
    [17]
    MAKKAR F M,CHANSRAKARAN S,SANKAR N. Performance of 3-D geogrid-reinforced sand under direct shear mode[J]. International Journal of Geotechnical Engineering,2019,13(3):227-235. doi: 10.1080/19386362.2017.1336297
    [18]
    蔡 春,张孟喜,赵岗飞,等. 带加强肋单向土工格栅的拉拔试验[J]. 岩土力学,2012,33(1):53-59,64. doi: 10.3969/j.issn.1000-7598.2012.01.009
    [19]
    MOSALLANEZHAD M,ALFARO M C,HATAF N,et al. Performance of the new reinforcement system in the increase of shear strength of typical geogrid interface with soil[J]. Geotextiles and Geomembranes,2016,44(3):457-462. doi: 10.1016/j.geotexmem.2015.07.005
    [20]
    刘飞禹,武文静,符洪涛,等. 基于3D打印的立体格栅网筋土界面剪切特性研究[J]. 中国公路学报,2022,35(4):60-68. doi: 10.3969/j.issn.1001-7372.2022.04.003
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Figures(7)  / Tables(6)

    Article Metrics

    Article views (73) PDF downloads(11) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return