Citation: | Wang Bo, Lv Guo, Li Jiang. Experimental Study on Micro-macro Shear Properties of Sand Considering Particle Size[J]. GEOTECHNICAL ENGINEERING TECHNIQUE, 2023, 37(5): 618-622. doi: 10.3969/j.issn.1007-2993.2023.05.017 |
[1] |
孔 亮,陈凡秀,李 杰. 基于数字图像相关法的砂土细观直剪试验及其颗粒流数值模拟[J]. 岩土力学,2013,34(10):2971-2978. doi: 10.16285/j.rsm.2013.10.021
|
[2] |
BEEN K,JEFFERIES M G. A state parameter for sands[J]. Géotechnique,1985,35(2):99-112.
|
[3] |
郝冬雪,岳 冲,陈 榕,等. 常压至高压下中砂剪切特性及应力–剪胀关系[J]. 岩土工程学报,2020,42(4):765-772. doi: 10.11779/CJGE202004021
|
[4] |
刘方成,吴孟桃. 橡胶砂直剪试验的颗粒离散元细观力学模拟[J]. 合肥工业大学学报(自然科学版),2017,40(7):944-951.
|
[5] |
李 航,陆 烨,孙 康. 标准砂直剪试验的PFC数值模拟[J]. 上海大学学报(自然科学版),2017,23(5):780-788.
|
[6] |
杨忠平,雷晓丹,王 雷,等. 含石量对土石混合体剪切特性影响的颗粒离散元数值研究[J]. 工程地质学报,2017,25(4):1035-1045. doi: 10.13544/j.cnki.jeg.2017.04.018
|
[7] |
张振平,盛 谦,付晓东,等. 基于颗粒离散元的土石混合体直剪试验模拟研究[J]. 应用基础与工程科学学报,2021,29(1):135-146. doi: 10.16058/j.issn.1005-0930.2021.01.012
|
[8] |
李广信. 高等土力学[M]. 北京: 清华大学出版社, 2004.
|
[9] |
MASSON S,MARTINEZ J. Micromechanical analysis of the shear behavior of a granular material[J]. Journal of Engineering Mechanics,2001,127(10):1007-1016. doi: 10.1061/(ASCE)0733-9399(2001)127:10(1007)
|
[10] |
JIANG M J,YU H S,HARRIS D. Bond rolling resistance and its effect on yielding of bonded granulates by DEM analyses[J]. International Journal for Numerical & Analytical Methods in Geomechanics,2006,30(8):723-761.
|
[11] |
FENG Y T,OWEN D. Discrete element modelling of large scale particle systems—I: exact scaling laws[J]. Computational Particle Mechanics,2014,1(2):159-168. doi: 10.1007/s40571-014-0010-y
|