Citation: | Zhao Dinghong, Liu Huancun, Cai Zhi. Study on Basic Mechanical Properties of High Fill Materials in Chongqing[J]. GEOTECHNICAL ENGINEERING TECHNIQUE, 2023, 37(6): 686-691. doi: 10.3969/j.issn.1007-2993.2023.06.010 |
[1] |
葛华康. 高含石量土石混合体高填方边坡稳定性与变形研究[D]. 重庆: 重庆大学, 2016.
|
[2] |
油新华,汤劲松. 土石混合体野外水平推剪试验研究[J]. 岩石力学与工程学报,2002,21(10):1537-1540. doi: 10.3321/j.issn:1000-6915.2002.10.021
|
[3] |
徐文杰,胡瑞林,岳中琦,等. 基于数字图像分析及大型直剪试验的土石混合体块石含量与抗剪强度关系研究[J]. 岩石力学与工程学报,2008,27(5):996-1007. doi: 10.3321/j.issn:1000-6915.2008.05.016
|
[4] |
赵金凤,严 颖,季顺迎. 基于离散元模型的土石混合体直剪试验分析[J]. 固体力学学报,2014,35(2):124-134.
|
[5] |
薛亚东,岳 磊,李硕标. 含水率对土石混合体力学特性影响的试验研究[J]. 工程地质学报,2015,23(1):21-29.
|
[6] |
刘龙旗,毛雪松,肖亚军,等. 含水率对坡积体路基填料剪切特性影响试验研究[J]. 中国公路学报,2020,33(9):126-135. doi: 10.3969/j.issn.1001-7372.2020.09.013
|
[7] |
别江波,宋龙龙,李志勇,等. 西南某高填方边坡的变形及稳定性数值模拟[J]. 河南科技,2021,40(16):77-79. doi: 10.3969/j.issn.1003-5168.2021.16.035
|
[8] |
黄 玮,梁永辉. 西南山区某高填方边坡支护设计与施工[J]. 施工技术,2020,49(S1):53-57.
|
[9] |
GB/T 50123—2019 土工试验方法标准[S]. 北京: 中国计划出版社, 2019.
|
[10] |
GB/T 50145—2007 土的工程分类标准[S]. 北京: 中国计划出版社, 2008.
|
[11] |
谭 超. 巨粒混合土填料蠕变特性的大型单轴压缩试验研究[D]. 成都: 成都理工大学, 2015.
|
[12] |
董 云,柴贺军. 土石混合料剪切面分形特征试验研究[J]. 岩土力学,2007,28(5):1015-1020.
|
[13] |
任明辉. 土石混合体剪切强度的尺寸效应研究[D]. 徐州: 中国矿业大学, 2019.
|
[14] |
王晓帅,王子寒,景晓昆,等. 粗粒土大型直剪试验宏细观研究与离散元模拟[J]. 深圳大学学报(理工版),2020,37(3):279-286.
|
[15] |
韦超群,邓清禄. 基于大型直剪试验的碎石土含水率影响研究[J]. 低温建筑技术,2018,40(2):126-128,142.
|