Citation: | Huang Dan, Ma Hao, Yang Xiaocong, Li Yuxuan, Zheng Zhijie. Current Research and Prospect on Cutter Wear of Tunnelling Boring Machine[J]. GEOTECHNICAL ENGINEERING TECHNIQUE, 2023, 37(3): 253-261. doi: 10.3969/j.issn.1007-2993.2023.03.001 |
[1] |
张镜剑,傅冰骏. 隧道掘进机在我国应用的进展[J]. 岩石力学与工程学报,2007,26(2):226-238. doi: 10.3321/j.issn:1000-6915.2007.02.002
|
[2] |
万治昌,沙明元,周雁领. 盘形滚刀的使用与研究(1)—TB880E型掘进机在秦岭隧道施工中的应用[J]. 现代隧道技术,2002,39(5):1-11. doi: 10.3969/j.issn.1009-6582.2002.05.001
|
[3] |
刘海龙. 硬岩隧道掘进机滚刀磨损机理研究[D]. 天津: 天津大学, 2014.
|
[4] |
任栋杰. 土岩转换地层盾构隧道滚刀磨损机理及预测模型研究[D]. 上海: 上海交通大学, 2019.
|
[5] |
王 贺. 复合地层TBM破岩过程滚刀磨损机理及掘进效率研究[D]. 重庆: 重庆大学, 2016.
|
[6] |
严 辉. 盾构隧道施工中刀盘泥饼的形成机理和防治措施[J]. 现代隧道技术,2007,44(4):24-27. doi: 10.3969/j.issn.1009-6582.2007.04.006
|
[7] |
ZHAO J,GONG Q M,EISENSTEN Z,et al. Tunnelling through a frequently changing and mixed ground: A case history in Singapore – Science Direct[J]. Tunnelling and Underground Space Technology,2007,22(4):388-400. doi: 10.1016/j.tust.2006.10.002
|
[8] |
胡 怡,顾红星,张国利. TBM盘形滚刀的失效分析[J]. 金属热处理,2002,27(1):55-56. doi: 10.3969/j.issn.0254-6051.2002.01.025
|
[9] |
TANIMOTO C,YAMANAKA S,TSUSAKA K,et al. A Study on cutter wear and mechanical properties of rocks in tunneling with a TBM[J]. Journal of the Society of Materials Science Japan,2006,55(1):29-36. doi: 10.2472/jsms.55.29
|
[10] |
孙 红,周 鹏,孙 健,等. 岩石隧道掘进机滚刀受力及磨损[J]. 辽宁工程技术大学学报(自然科学版),2013,32(9):87-91.
|
[11] |
杨延栋,陈 馈,郭 璐,等. 全断面岩石隧道掘进机滚刀磨损影响因素分析[J]. 隧道建设,2016,36(11):1394-1400.
|
[12] |
张厚美. 复合地层中盾构刀具磨损的检测方法研究[C] //上海国际隧道工程研讨会论文集. 上海: 同济大学出版社, 2005.
|
[13] |
管会生,高 波. 盾构切削刀具寿命的计算[J]. 工程机械,2006,37(1):25-28.
|
[14] |
HASSANPOUR J,ROSTAMI J,AZALI S T,et al. Introduction of an empirical TBM cutter wear prediction model for pyroclastic and mafic igneous rocks; a case history of Karaj water conveyance tunnel, Iran[J]. Tunnelling and Underground Space Technology incorporating Trenchless Technology Research,2014,43:222-231.
|
[15] |
牛江川,赵红霞,李素娟,等. 盾构滚刀磨损在线检测系统设计[J]. 石家庄铁道大学学报(自然科学版),2015,28(28):58-62.
|
[16] |
任德志,孙晓平. 基于CC1101的盾构滚刀磨损监测系统的设计[J]. 矿山机械,2015,43(4):5. doi: 10.16816/j.cnki.ksjx.2015.04.029
|
[17] |
龚秋明,王庆欢,王杜娟,等. 盾构隧道施工刀盘状态实时监测系统研制[J]. 现代隧道技术,2021,58(2):41-49.
|
[18] |
GONG Q M,WU F,WANG,D J,et al. Development and application of cutterhead working status monitoring system for shield TBM tunnelling[J]. Rock Mechanics and Rock Engineering,2021,54:1731-1753.
|
[19] |
王光辉,吕瑞虎. 盾构刀具磨损超声波检测系统室内试验研究[J]. 隧道建设,2015,35(10):1089-1096.
|
[20] |
WILLIS D,SHANAHAN A,BOX Z. Remote disc cutter monitoring in tunneling[J]. Tunnel,2011,30(8):68-75.
|
[21] |
张晓平,唐少辉,吴 坚,等. 苏通GIL综合管廊工程泥水盾构穿越致密复合砂层磨蚀性预测分析[J]. 工程地质学报,2017,25(5):1364-1373.
|
[22] |
龚秋明,佘祺锐,丁 宇. 大理岩磨擦试验及隧道掘进机刀具磨损分析−锦屏二级水电站引水隧洞工程[J]. 北京工业大学学报,2012,38(8):1196-1201. doi: 10.11936/bjutxb2012081196
|
[23] |
王 旭,李 晓,廖秋林. 岩石可掘性研究的试验方法述评[J]. 地下空间与工程学报,2009,5(1):67-73. doi: 10.3969/j.issn.1673-0836.2009.01.013
|
[24] |
WEST G. A relation between abrasiveness and quartz content for some coal measures sediments[J]. International Journal of Mining & Geological Engineering,1986,4(1):73-78.
|
[25] |
ALBER M,YARALI O,DAHL F,et al. ISRM suggested method for determining the abrasivity of rock by the CERCHAR abrasivity test[J]. Rock Mechanics & Rock Engineering,2014,47:261-266.
|
[26] |
ASTM D7625-10: Standard Test Method for Laboratory Determination of Abrasiveness of Rock Using the CERCHAR Method[S]. 2010.
|
[27] |
AL-AMEEN S I,WALLER M D. The influence of rock strength and abrasive mineral content on the Cerchar abrasive index[J]. Engineering Geology,1994,36(3-4):293-301. doi: 10.1016/0013-7952(94)90010-8
|
[28] |
MICHALAKOPOULOS T N,ANAGNOSTOU V G,BASSANOU M E,et al. The influence of steel styli hardness on the Cerchar abrasiveness index value[J]. International Journal of Rock Mechanics & Mining Sciences,2006,43(2):321-327.
|
[29] |
PLINNINGER R, KÄSLING H, K. THURO C, et al Testing conditions and geomechanical properties influencing the CERCHAR abrasiveness index (CAI) value[J]. International Journal of Rock Mechanics and Mining Sciences,2003,40(2):259-263. doi: 10.1016/S1365-1609(02)00140-5
|
[30] |
BLINDHEIM O T , BRULAND A. Boreability testing[C]//Norwegian TBM tunneling—30 years of experience with TBMs in Norwegian tunneling. Trondheim, Norway: Norwegian Soil and Rock Engineering Association, 1998.
|
[31] |
乔世范,王 超,刘志新,等. 基于磨粒磨损机理的全断面隧道掘进机滚刀寿命预测[J]. 吉林大学学报(工学版),2020,50(6):2068-2073. doi: 10.13229/j.cnki.jdxbgxb20190807
|
[32] |
杨延栋,陈 馈,李凤远,等. 盘形滚刀磨损预测模型[J]. 煤炭学报,2015,40(6):1290-1296.
|
[33] |
WIJK G. A model of tunnel boring machine performance[J]. Geotechnical and Geological Engineering,1992,10(1):19-40. doi: 10.1007/BF00881969
|
[34] |
龚秋明,许弘毅,李立民. 岩石磨蚀性指数分级讨论[J]. 地下空间与工程学报,2021,17(3):748-758.
|
[35] |
ROSTAMI J, OZDEMIR L, BRULAND A, et al. Review of issues related to cerchar abrasivity testing and their implications on geotechnical investigations and cutter cost estimates[C]. Proceedings of the Retc. Hutton, [s. n. ]: 2005, 738-751.
|
[36] |
杨媛媛,黄宏伟. 围岩分类在TBM滚刀寿命预测中的应用[J]. 地下空间与工程学报,2005,1(5):721-724.
|
[37] |
闫长斌,姜晓迪,杨继华,等. 考虑地质适宜性和滚刀直径的TBM刀具消耗预测[J]. 隧道建设,2018,38(7):1243-1250.
|
[38] |
GEHRING K. Prognosis of advance rates and wear for underground mechanized excavations[J]. Felsbau,1995,13(6):439-448.
|
[39] |
BRULAND A. Hard rock tunnel boring[D]. Trondheim, Norway: Norwegian University of Science and Technology, 1998.
|
[40] |
MACIAS F J. Hard Rock Tunnel Boring: Performance Predictions and Cutter Life Assessments[D]. Trondheim, Norway: Norwegian University of Science and Technology, 2016.
|
[41] |
FARROKH E,KIM D Y. A discussion on hard rock TBM cutter wear and cutterhead intervention interval length evaluation[J]. Tunnelling and Underground Space Technology,2018,81:336-357. doi: 10.1016/j.tust.2018.07.017
|
[42] |
DAHL E,GRØV E,BREIVIK T. Development of a new direct test method for estimating cutter life based on the Sievers’J miniature drill test[J]. Tunnelling and Underground Space Technology,2007,22(1):106-116. doi: 10.1016/j.tust.2006.03.001
|
[43] |
MAIDL B, SCHMIDZ L, RITZ W, et al. Hard rock tunnel boring machines[M]. New York: John Wiley & Sons, 2008.
|
[44] |
BIENIAWSKI Z T, CELADA C B, GALERA J M, et al. Prediction of cutter wear using RME[C]//Budapest: ITA-AITES World Tunnel Congress, 2009.
|
[45] |
FRENZEL C. Disc cutter wear phenomenology and their implications on disc cutter consumption for TBM[C]. San Francisco, Califrnia: The 45th American Rock Mechanics / Geomechanics Symposium, 2011.
|